Cherubini Plug&Play Ocean Easy Instrucciones página 12

RESTORING THE ORIGINAL CONFIGURATION
Restoring the original configuration can be achieved in two ways, with the button switch
sequence:
from the OPENING position
Bring the rolling shutter to
the upper limit switch and
proceed as follows:
from the CLOSING position
Bring the rolling shutter to
the lower limit switch and
proceed as follows:
OR
with wired connection:
- Connect both the brown and black motor wires under the same switch, e.g. UP.
- Press the UP button for at least 2 seconds.
- Disconnect and then restore the original control switch electrical connections (see p. 9).
UP UP DOWN
DOWN DOWN
12
UP UP
UP DOWN DOWN
1- brown
2- black
3- blue
4- yellow-green
DOWN
UP