How to use
Product description
Due to technological innovations, the product description in this manual may not completely match
your appliance. More detailed information corresponds to the final product.
1
5
How to use
Before use
Clean the appliance with warm water and detergent and dry it with a cloth.
Note: Electrical components should be wiped with a dry cloth.
Set the temperature on the temperature control knob. With "1" being the hottest and "7" being the col-
dest. Initially set the temperature to "4". Place the food inside the freezer. After using the freezer for 24
hours, set the freezer to the desired setting.
In case you unplug the freezer or experience a power failure, wait 5 minutes before plugging it back in.
Temperature Control
The freezer temperature is controlled by an electronic thermostat, which operates according to the am-
bient temperature surrounding the appliance and different types and quantities of food to be stored.
The temperature inside can be adjusted, with the thermostat knob, in different temperature ranges.
Compressor operation indicator
The red indicator light on the panel indicates that it is on. This red light indicates that the freezer is opera-
ting normally. The control panel is marked with 1-8 temperature levels without this number representing
a specific temperature. Turning the thermostat knob clockwise will increase the compressor run time,
decrease the idle time and lower the temperature inside the freezer. Turning the thermostat knob coun-
terclockwise will decrease the compressor run time, increase the idle time and increase the temperature
inside the freezer.
2
3
4
7
6
(Green)
28
1
Inner cap
2
Hinges
3
Metal food basket
4
Temperature control adjust-
ment
5
External drain plug
6
Compressor operation indi-
cator light
7
Operation indicator light
Operation indicator (Red)
English
infiniton.es