Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Fasten the SHORT BRACES (R) to the RIGHT END (O)
å
and UPRIGHT (N). Turn eight 1/2" ALLEN SCREWS (3)
using the ALLEN WRENCH (4).
Fasten the LONG TOP BRACE (P) to the UPRIGHT (N)
å
and LEFT END (M). Turn four 1/2" ALLEN SCREWS (3)
using the ALLEN WRENCH (4).
Fasten the BACK BRACE (Q) to the UPRIGHT (N) and
å
LEFT END (M). Turn four 1/2" ALLEN SCREWS (3) using
the ALLEN WRENCH (4).
IMPORTANT: Do not tighten
the ALLEN SCREWS until
assembly is complete.
M
420032
3
4
P
Q
www.sauder.com
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
1/2" ALLEN SCREW
(16 used in this step)
R
N
Remember:
Righty tighty.
Lefty loosey.
3
O
R
Page 5
Publicidad
