Sauder 411222 Instrucciones De Montaje página 10

Step 6
First, fi ll the hole in the short edge of the UPRIGHT (C3) 1/4 to 1/2
å
full with GLUE (177M). Then, insert a WOOD DOWEL (15F) into the
hole. Wipe away the excess GLUE.
Next, fi ll the two holes in the other short edge of the UPRIGHT (C3)
å
1/4 to 1/2 full with GLUE. Then, insert two WOOD DOWELS (15F)
into these holes. Wipe away the excess GLUE.
Now, fi ll the holes in the BACK PANEL (I3) 1/4 to 1/2 full with GLUE.
å
Be sure to fi ll the second and fourth holes from the top edge as
shown.
Fasten the UPRIGHT (C3) to the BACK PANEL (I3). Tighten two
å
HIDDEN CAMS. Wipe away the excess glue.
NOTE: Be sure the WOOD DOWELS in the UPRIGHT insert into the
å
holes in the BACK PANEL.
Maximum
210 degrees
Minimum
190 degrees
Page 10
C3
15F
Arrow
I3
These holes
must be here.
S u r
f a c
e w
H I D
i t h
D E N
C A
M S
15F
411222
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Roller end
www.sauder.com/services