Step 16
To insert the drawers into your unit, tip the front of the drawer down and drop the rollers on the
å
drawer behind the rollers on the unit. Lift the front of the drawer up and slide it into the unit.
To make adjustments to the drawer, loosen the SCREWS in the DRAWER FRONT BRACKETS,
å
make needed adjustments, and tighten the SCREWS.
This completes assembly. Clean with a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
Page 20
T
Place the roller on the SLIDE
behing the roller on the RAIL.
411222
S
www.sauder.com/services