Pioneer X-HM21-K Manual De Instrucciones página 13

Getting started
Sound controls
Equalizer
When the EQUALIZER is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER repeatedly until the desired sound mode
appears.
FLAT A flat and basic sound.
A powerful sound that
ACTIVE
emphasizes low and high tones.
A sound that allows the radio or
DIALOGUE
vocals to be heard more easily.
A sound that can be enjoyed
NIGHT
at night even with lower volume.
P.BASS control
When the power is first turned on, the unit will enter the
P.BASS mode which emphasises the bass frequencies. To
cancel the P.BASS mode, press the P.BASS on the remote
control.
Bass/treble control
Press the BASS/TREBLE, then press FG/HI to adjust the
bass or treble.
Note
Simultaneous operation of EQUALIZER, P.BASS and BASS/
TREBLE is not possible. Only the functions that you have
selected will be active.
If you select one of three functions, features
that are not selected will be set as follows.
1 If you change the settings of P.BASS (ON/
OFF).
• EQUALIZER : FLAT
• BASS/TREBLE : BASS=0, TREBLE=0
2 If you change the settings of EQUALIZER.
• P.BASS : OFF
• BASS/TREBLE : BASS=0, TREBLE=0
3 If you change the settings of BASS/TREBLE.
• P.BASS : OFF
• EQUALIZER : FLAT
Setting the wake-up timer
Used to change the existing timer setting, or to set a new
timer.
1 Press 1 STANDBY/ON to turn the power on.
2 Press and hold CLOCK/TIMER.
3 Press HI to select "ONCE" or "DAILY",
then press ENTER.
ONCE – Works once only at a preset time.
DAILY – Works at the preset time on a preset day.
4 Press HI to select "TIMER SET", then
press ENTER.
5 Press HI to select the timer playback
source, then press ENTER.
• CD, FM, AM, USB/iPod, USB, AUDIO IN and LINE can
be selected as the playback source.
6 Press HI to select the timer day, then
press ENTER.
7 Press HI to set the hour, then press
ENTER.
8 Press HI to set the minute, then press
ENTER.
• Set the time to finish as in steps 7 and 8 above.
9 Adjust the volume press VOLUME +/– , then
press ENTER.
10 Press 1 STANDBY/ON to enter the power
standby mode.
• The TIMER indicator lights up.
04
13
En