Listening to the radio
1
2
When an FM stereo broadcast is
hard to receive
• See also page 24.
=
[Turn]
=
Select "TUNER"
"MONO"
=
"MONO ON"
Reception improves, but stereo effect will be lost.
• "MO" lights up on the display.
To restore the stereo effect, repeat the same
procedure to select "MONO OFF." The MO indicator
goes off.
8
Select "FM" or "AM."
Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until "M" flashes on the display,
then press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, "ST"
lights up on the display.
[Press]
FM station automatic presetting
— SSM (Strong-station Sequential
Memory)
You can preset up to 18 stations for FM.
1
While listening to a station...
2
Select the preset number range you want to
store.
3
Local FM stations with the strongest signals are
searched and stored automatically.
• If an HD Radio tuner box is connected, you can also
search and store the AM stations.
To preset other 6 stations, repeat from step 1 again.