Philips AZ 1030/17 Manual Del Usuario página 13

Recording from the CD player – CD synchro start
1 Set the POWER control to CD.
2 Insert a CD and, if desired, program the track numbers.
3 Press OPEN·STOP / 9 to open the cassette compartment.
4 Insert a blank, unprotected cassette and close the cassette
compartment.
5 Press RECORD 0 to start recording.
™ Playing of the CD or program starts automatically.
6 For brief interruptions, press PAUSE ;. Press the PAUSE ; key
again to resume recording.
7 To stop recording, press OPEN·STOP / 9.
Note: the recording can be started from different positions:
– if the CD player is in pause mode, recording will start
from this very position (use ∞ or § );
– if the CD player is in stop mode, recording will start from
the beginning of the CD or program.
Recording from the radio
1 Tune to the desired radio station (see "RADIO").
2 Press OPEN·STOP / 9 to open the cassette compartment.
3 Insert a blank, unprotected cassette and close the cassette
compartment.
4 Press RECORD 0 to start recording.
5 For brief interruptions press PAUSE ;. To resume recording press
the PAUSE ; key again.
6 To stop recording, press OPEN·STOP / 9.
CASSETTE RECORDER
13