Citizen CT-S4000 Manual De Usuario página 26

When using "label paper" with CT-S4000L and CT-S4000DCL, refer to the following. Use
the following paper or the equivalent paper.
Paper type
Recommended thermal label paper
a) Label paper *L
C
L
Paper feeding
direction
E
F
Printable area
G
CAUTION!
Pay attention to the following when using Auto Cutter. Otherwise, a cutter lock or a
cutter failure may occur.
■ Set the cut length of paper to 25 mm or more.
■ When using label paper, cut the gap between labels (liner sheet). Do not cut the label
paper (tack paper).
■ Adusting the paper sensor must be carried when the type of liner is changed.
Label paper cannot be used with the model supporting blackmark (CT-S4000M/CT-
S4000DCM).
150LA-1 from Ricoh,
GG40/P22/G6B from Ojitac, HD75 from Nippon Paper
A
B
D M
Full cut
position
Product name
H I
Mark
A Liner width
B Label width
C Left edge of label
D Print width
J K
E Top margin
F Print length
G Bottom margin
H Cut position between labels
I Gap between labels
J Label length
K Label pitch
L Left margin
M Right margin
— 23 —
Unit: mm
Item Dimensions
58 to 112
54 to 108 + 0.5
2 + 0.5
50 to 104
_
2 + 1
21 to 296
_
2 + 1
1/2 x (Size I)
4 to 30
25 to 300
I+J
_
2 + 1
2 + 1 _
0
-1
_