Publicidad
Idiomas disponibles
Idiomas disponibles
REPLACE THE BELT
1. Turn your Power Duo
Use a Phillips screwdriver to
take off the 6 screws. Lift off
the bottom plate.
3. Slip belt around the brushroll
in area without bristles (A)
and metal pin (B). Align the
brushroll in pockets at end of
nozzle. Put the plate back on
and screw together.
B
A
For replacement belt style F15 visit dirtdevil.com or call us at (800) 321-1134.
To reduce the risk of injury from moving parts - Unplug
before servicing.
over.
™
2. Then take off that old belt.
CAUTION
Slide on a new belt with the
lettering on the outside.
LUBRICATION:
The motor and brushroll are
equipped with bearings which
contain sufficient lubrication for
their lifetime. The addition of
lubricant could cause damage.
Do not add lubricant to motor
or brushroll.
7 17
Publicidad
