Publicidad
Idiomas disponibles
Idiomas disponibles
6. Technical data
Mains voltage
Power consumption
Stroke rate
Lifting movement
Base
Tilting table
Table size
Saw blade length approx.
Swing
Max. cutting height at 0°
Cutting height max. at 45°
Suction port
Weight
Subject to technical modifications!
*Operating mode S1:
Continuous operation at constant load
**Operating mode S2- short-term operation:
Operation at a constant load for 5/30 mins or less, fol-
lowed by a time out of operation and a pause of suffi-
cient duration to allow the machine to cool to within 2 K
of the ambient temperature.
Device emissions values
Noise
The noise levels have been determined in accordance
with EN 61029.
Wear hearing protection.
Excessive noise can result in a loss of hearing.
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L
WA
Uncertainty K
WA
The stipulated values are emission values and so do
not necessarily represent safe work station values.
26 | GB
230 V/50 Hz
70 watts (S1*)
90 watts (S2 30min**)
125 Watt (S2 5min**)
550-1650 rpm
15 mm
630 x 295 mm
0° to 45° to the left
415 x 255 mm
133 mm
405 mm
50 mm
22 mm
35 ø mm
14.5 kg
77.3 dB(A)
3 dB(A)
87.4 dB(A)
3 dB(A)
www.scheppach.com
Although there is a correlation between emission levels
and exposure levels, it is not possible to reliably deter-
mine whether additional precautionary measures will
be required or not based on this.
Factors that could influence the emissions level pres-
ent at any given time at the work station include the
duration of exposure, the nature of the working area,
other noise sources etc. e.g. the number of machines
and neighbouring processes. The permitted worksta-
tion values can also vary from country to country.
However, this information should enable the operator
to better evaluate the hazards and risks.
Limit the noise level to a minimum!
• Only use devices which are free of defects.
• Maintain and clean the device at regular intervals.
• Adapt your working methods to the device.
• Do not overload the device.
• Have the device checked if necessary.
• Switch the device off if it is not in use.
Suitable saw blades
All industry-standard saw blades with a minimum
length of 127 mm with and without a pin may be used.
7.
Unpacking
• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the
packaging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for trans-
port damage.
• If possible, keep the packaging until the expiry of
the warranty period.
m WARNING
The device and the packaging are not children's
toys! Do not let children play with plastic bags,
films or small parts! There is a danger of choking
or suffocating!
8. Commissioning
8.1 General notes
• Prior to commissioning, all covers and safety devic-
es must be mounted correctly.
• It must be possible for the saw blade to run freely.
• In case of previously machined wood, be aware of
any foreign objects, such as nails or screws, etc.
Publicidad
