Descargar Imprimir esta página

Hitachi YUTAKI S80 Serie Manual De Instalación Y Funcionamiento página 25

Ocultar thumbs Ver también para YUTAKI S80 Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55
INSTALLATION
7.2 SELECTING AN INSTALLATION CONFIGURATION
7.2.1 DHW tank configurations
DHW tank has the following installation configuration possibilities with the YUTAKI S80 indoor unit:
A) Indoor unit with HITACHI tank
(Tank integrated over the indoor unit)
Depending on the configuration type, the installation procedure will be different.
7.2.2 Dimensions
N O T E
Height dimensions are shown with the minimum mounting
foot height. These values can be adjusted up to +30 mm.
All dimension in mm.

Indoor unit with HITACHI tank (Tank integrated
over the indoor unit)
RWH-(4.0-6.0)FS(V)NFE +
DHWS195S-2.0H1E
25
PMML0291A rev.2 - 09/2014
B) Indoor unit with HITACHI tank
(Tank beside the indoor unit)
RWH-(4.0-6.0)FS(V)NFE +
DHWS260S-2.0H1E
I M P O R TA N T N O T E
All the installation information about DHW connec-
tion is explained in this chapter.
The installation information about the space heating
connection and indoor unit refrigerant / wiring con-
nection is explained in the section
(Without tank)
of the
operation
manual.

Indoor unit with HITACHI tank (Tank beside the
indoor unit)
RWH-(4.0-6.0)FS(V)NFE + DHWS195S-2.0H1E
RWH-(4.0-6.0)FS(V)NFE + DHWS260S-2.0H1E
Indoor unit alone
YUTAKI S80 Installation and

Publicidad

loading

Este manual también es adecuado para:

Dhws195s-2.0h1eDhws260s-2.0h1e