BLUEFIN Fitness KICK 5.0 Manual De Instrucciones página 20

[ UK ]
TROUBLESHOOTING
PROBLEM
Treadmill will
not start.
Belt slips.
Belt hesitates
when stepped
on.
Belt is not
centered.
POTENTIAL CAUSES
Treadmill not plugged in.
Safety Tether Key is not
correctly installed.
Circuit breaker (home) has been
tripped.
Treadmill circuit breaker has
been tripped.
Belt not tight enough.
Not enough lubrication applied
onto the running belt.
Belt is too tight.
Running belt tension not even
across the rear roller.
CORRECTIONS
Plug the power cord into a wall
outlet.
Reinstall the Safety Tether Key.
Reset the circuit breaker, or call an
electrician to replace the circuit
breaker.
Wait 5 minutes & then try to restart
the treadmill.
Adjust belt tension.
Apply lubricant.
Adjust belt tension.
Centre the belt.