Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1
Insert the recommended wall anchors
It is recommended that you use the provided anchors when
mounting your thermostat.
Recommended drill bit size is 7/32 – 1/4-inch.
Optional: Attach the optional wall cover to the wall
plate
If you choose to use the optional wall cover to hide
blemishes, snap the wall plate to the optional wall cover
before continuing.
2
Bundle and insert wires through the clear
rubber holder
Guide the wires through the clear rubber holder on
the back of the wall plate.
Do not remove the clear rubber wire holder.
* The TH8732WFH5004 requires a common wire, does not use a battery and does not have the level pictured.
4
*
Publicidad
