Replacing Carbon Brushes; Optional Accessories - Makita RT0700C Manual De Instrucciones

Ocultar thumbs Ver también para RT0700C:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

For the plunge base
1
1. Dust nozzle
2. Thumb screw
011853
Use the dust nozzle for dust extraction. Install the dust
nozzle on the tool base using the thumb screw so that
protrusion on the dust nozzle fit to the notch in the tool
base.
Then connect a vacuum cleaner to the dust nozzle.
011854
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
unplugged
before
inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result.
2
attempting
to
perform

Replacing carbon brushes

001145
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
2
011846
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These
accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Straight & groove forming bits
Edge forming bits
Laminate trimming bits
Straight guide assembly
Trimmer guide assembly
Trimmer base assembly
Tilt base assembly
Plunge base assembly
Offset base assembly
13
1. Limit mark
1
1. Screwdriver
2. Brush holder
cap
1
or
attachments
Only use
accessory or
are

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rt0701c

Tabla de contenido