Miele professional PG 8080 Plano De Instalación página 32

Technical Datasheet
Commercial Dishwasher
Legend:
Electrical
connection
It is recommended to make electrical connection via a plug
and socket so that electrical safety checks can be carried
out easily. The socket must be accessible after machine
installation.
With a fixed installation, this must be via a main switch to
be provided on site, which must totally isolate the machine
from the mains with a contact gap of at least 3 mm.
The use of a grounded leakage circuit breaker (ELCB) is
strongly recommended.
If necessary, an equipotential bond with good contact
connection must be provided in accordance with all
appropriate national and local regulations.
Cold water or Max. Water hardness
Hot water Min. Flow pressure
Max. pressure
Throughput
Connection thread - on site (flat sealing)
Length of connection hose (supplied)
Max. Hot water
DVGW certified
Direct connection without fuse box permissible
Drain water Drain hose (Int. dia. × wall thickness × l)
Drain pump head height from floor level, max.
Drainage hose delivery, max.
On-site hose connector (Ext. dia. × l)
Machine data Height with lid (included)
Height without lid
Width
Depth
Installation should only be carried out by authorized installers and must comply with local and national building codes. Ensure
that appropriate furniture and materials are in the area surrounding the dishwasher otherwise damage from condensation may
occur. Observe installation instructions when installing this machine. Alteration rights reserved.
Installation plan G 8080
Date: 12.12.2012
Circled, bold-type abbreviations:
Connection required
Circled, bold-type abbreviations:
Connection required or optional
Voltage
Rated load
Fuse rating
Minimum cross-section
Length of electrical cord with plug
Supplied plug
Voltage
Rated load
Fuse rating
Minimum cross-section
Length of electrical cord with plug
Supplied plug
G 8080
US
AC 120/208 V - AC 120/208 V -
240/60 Hz 240/60 Hz
3.5-4.2 kW 3.5-4.2 kW
2 x 30 A 2 x 30 A
10/4 AWG 10/4 AWG
5' 10 7/8" 1.8 m
NEMA 14-30P NEMA 14-30P
AC 120/60 V/Hz AC 120/60 V/Hz
1.5 kW 1.5 kW
15 A 15 A
14/3 AWG 14/3 AWG
5' 7" 1.7 m
NEMA 5-16P NEMA 5-15P
37.5 gpg 36 °dH
4.35 psi 30 kPa
145 psi 1,000 kPa
1.08 gal/min 4.1 l/min
3/4" ext. thread 3/4" ext. thread
11.5 NH 11.5 NH
4' 11 1/16" 1500 mm
140 °F 60 °C
7/8" x ¼" x 22 x 6 x 1500 mm
4' 11 1/16"
3' 3 3/8" 1 m
4.2 gal/min 16 l/min
7/8" x 1 3/16" 22 x 30 mm
33 7/16" 850 mm
32 5/16" 820 mm
23 9/16" 598 mm
23 5/8" 600 mm
Page 2