Miele professional PG 8080 Plano De Instalación página 34

Technical Datasheet
Commercial Dishwasher
Legend:
Electrical
1. Voltage (as supplied)
connection
Plug and socket connection recommended to facilitate
electrical safety tests. The socket must be accessible after
installation. On hard-wired machines, a multi-pole circuit
breaker with a minimum contact gap of 3 mm must be
provided on site. If necessary, equipotential bonding with
good galvanic contact must be provided in accordance with all
appropriate national and local regulations.
Cold water or Max. water hardness
Hot water Min. flow pressure
Max. pressure
Throughput
On-site connection thread
Length of connection hose (supplied)
Max. hot water temperature
Machine can be connected to water supply without the use of
a non-return valve.
Waste water Drain hose (Int. dia. × wall thickness × l)
Max. head height (measured from floor)
Max. transient throughput per drain hose
Hose sleeve for drain hose to be provided on site
(ext. dia. x l)
Machine data Built-in height
Width
Depth
Installation should only be carried out by authorized fitters in accordance with valid regulations!
Observe installation instructions when installing machine! Adjacent cabinetry should be made from commercial-grade
materials to prevent damage from steam and condensate. All rights reserved! Subject to change. Dimensions in mm.
Änderungsnr. Datum
A19564 12.12.2012
Installationsplan G 8080
Stand: 12.12.2012
Abbreviations in bold type:
Connection required
Abbreviations in circle with dashes:
Connection optional or required depending on model version
Rated load
Fuse rating
Connection cable, min. cross section
Length of supply lead with plug NEMA 5-15P
Voltage
Rated load
Fuse rating
Connection cable, min. cross section
Length of supply lead with plug NEMA
14-30P
Spannungsvarianten
PG 8080
CDN
V/Hz AC 120/60
kW 1.5
A 15
AWG 14/3
m 1.7
V/Hz AC 120/208-240/60
kW 3.9-4.2
A 2 x 30
AWG 10/4
m 1.7
gr/gal 36
kPa (psi) 30 (4.4)
kPa (psi) 1.000 (145)
l/min 4.1
inch 11.5 NH
(3/4" external thread)
mm 1500
°C 60
mm 22 x 6 x 1500
m 1.0
l/min 16
mm 22 x 30
mm 815 (+6.5)
mm 598
mm 570
Bezeichnung:
en
Seite 2