Teac TN-5BB Manual Del Usuario página 7

R
Amplifier or phono amplifier
Grounding terminal ( )
A
Use the included ground wire to connect this grounding
terminal to the grounding terminal of the amplifier, for
example.
o This is NOT an electrical safety ground.
If noise from speakers is conspicuous
If a ground wire is connected to the grounding terminal
of this unit, disconnecting it could reduce noise. Use the
method (connected/disconnected) that has the least
noise.
6
Connections
Included AC adapter
(GPE018S-120100-Z)
Connect only one type
of cable.
V Precautions when making
connections
L R L
o Do not plug the unit in until after making all
connections.
o Carefully read the manuals of the devices
that you are connecting and follow their
instructions when making connections.
Analog audio output connectors (L/R)
B
The cartridge signal is output directly through the analog
audio output connectors (L/R).
Use these when connecting to an amplifier or other
equipment that has PHONO input connectors. Connect
to the appropriate PHONO input connectors according
to the type of installed cartridge (MM or MC). The PHONO
input connectors of some equipment might be settable
for use with either MM or MC type input.
For details, refer to the operation manual of that
equipment.
Use the following types of cables for connections.
XLR: XLR cables (sold separately)
RCA: RCA cables
DC input connector
C
After completing all other connections, connect the
included AC adapter to this connector.
Confirm that the power plug of the AC adapter is
plugged into a power outlet.
o Do not use any AC adapter other than the one
included.
V Be sure to connect the power cord to
an AC outlet that supplies the correct
voltage. Connection to an outlet that
supplies incorrect voltage could cause
fire or electric shock.
V Hold the power plug when plugging it
into an outlet or unplugging it. Never
pull or yank on the power cord.
V Unplug the power cord from the outlet
when you are not planning to use the
unit for an extended period of time.
STANDBY/ON button
D
Press the STANDBY/ON button to turn the unit on or put
it in standby.
Names and functions of parts
Turntable (platter)
a
Place records centered on the turntable (platter).
b Counterweight
Tracking force adjustment ring
c
Anti-skating dial
d
Tonearm holder
e
This stand holds the tonearm in place.
Tonearm
f
Rotation speed setting knob
g
Select the rotation speed indicated on the record to be
played.
Rotation will stop when this is set to 0.
Headshell
h
This is a universal type that allows the cartridge to be
changed easily.
ARM LIFT button
i
Use to raise and lower the tonearm.
Press this button to raise the tonearm lifter, lighting the
indicator in the button. Press this again to lower the tone-
arm lifter, causing the indicator to become unlit.
We recommend using the tonearm lifter to avoid damaging
records and styluses, because it is safer and more certain
than using a finger to do so.