Domo DO1051K Manual De Instrucciones página 20

Reverse Door
5. Détachez la goupille de la charnière-étrier. Retournez l'arceau, puis fixez la goupille.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
oor
move the bottom hinge pin, turn the bracket over and replace it.
oor
Unscrew
move the bottom hinge pin, turn the bracket over and replace it.
oor
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
move the bottom hinge pin, turn the bracket over and replace it.
feet.
6. Fixez les vis et le support de charnière sur le côté opposé. Remettez les pieds réglables.
Unscrew
fitting the bottom hinge pin. Replace both adjustable
Unscrew
fitting the bottom hinge pin. Replace both adjustable
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
fitting the bottom hinge pin. Replace both adjustable
ack on. Ensure the door is aligned horizontally and
7. Remettez soigneusement la porte en place. Avant de resserrer la charnière upérieure, assurez-vous
t the seals are closed on all sides before finally
p hinge.
que la porte est alignée horizontalement et verticalement de sorte que les joints soient scellés sur
tous les côtés. Insérez la charnière et vissez-la sur le haut.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
8. Put the top cover and fix it with 2 screws on the back.
p hinge.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
r and fix it with 2 screws on the back.
p hinge.
r and fix it with 2 screws on the back. 9. Fix the thermostat knob. 8. Remettez le couvercle supérieur en place et fixez-le de nouveau avec les vis.
at knob.
r and fix it with 2 screws on the back.
at knob.
at knob.
20
DO1051K
Unscrew
8
8
Screw
Screw
Screw
screw
screw
8
screw
Screw
screw