Daikin FVXS09NVJU Manual De Instrucciones página 11

NOTE
Fahrenheit/Celsius display change function of remote controller
• The set temperature may increase when the display is changed to Celsius from Fahrenheit, because a fraction of 0.5°C is rounded up.
• Example: A set temperature of 65°F (equivalent to 18.5°C) will be converted into 19°C.
When the display is changed to Fahrenheit again, the set temperature will be converted into 66°F (equivalent to 19°C) instead of the
original set temperature (65°F) but a set temperature of 66°F (equivalent to 19°C) will be converted into 19°C with no temperature
change.
• A reception sound will go off for the transmission of set temperature to the indoor unit at the time of setting the Fahrenheit/Celsius display
change function.
Note on setting the clock
• If the indoor unit's internal clock is not set to the correct time, the ON/OFF TIMER and WEEKLY TIMER will not operate punctually.
Turn on the circuit breaker
• After the power is turned on, the fl aps of the indoor unit open and close once to set the
reference position.
To set the clock
1.
Press
�
2.
Press to set the current day of the week�
3.
Press �
4.
Press to set the clock to the present time�
• Holding down or rapidly increases or decreases the displayed time.
5.
Press �
• Point the remote controller at the indoor unit when pressing the buttons.
" " is displayed on the LCD.
" " and " " blink.
" " blinks.
" " blinks.
Read Before Operation
10