Publicidad
Idiomas disponibles
Idiomas disponibles
3. Turn the Router upside down and hold the Spindle
in place with the Spindle Wrench while turning the
Collet Nut counterclockwise with the Collet Nut
Wrench to loosen the Collet Nut.
Collet
Nut (1)
Spindle
Wrench (50)
Adjusting the Cutting Depth
1. Place the router on a flat wood surface. Unlock the
Lock Lever (30).
Lock Lever
(30)
4. Remove or insert a Collet Chuck as needed to fit the
bit size, then insert the bit (sold separately) and
tighten the Collet Nut with the Wrenches.
Collet Nut
Wrench (51)
Spindle
2. Rotate the Main Housing until the tip of the bit
touches the workpiece surface. Lock the Lock Lever.
(sold separately)
Collet
Nut (1)
Spindle
Wrench (50)
Main
Housing
(5)
Spindle
www.ELITETOOLS.co
Bit
Collet Nut
Wrench (51)
Spindle
9
Keep Working
Publicidad
