Publicidad
Idiomas disponibles
Idiomas disponibles
MOUNTING THE GUARD
WARNING:
of the blade on the guard and protect your hands from being injured by the blade.
WARNING:
assembling parts, making adjustments, cleaning, or when the product is not in use.
1. Remove the battery pack from the
trimmer.
2. Loosen the two bolts in the guard
with the M5 hex wrench; remove
the bolts and spring washers from
the guard (Fig. 3).
3. Lift the trimmer head and face it
downward; align the two mounting
holes in the guard with the two
assembly holes in the base of the
shaft. Make sure that the internal
surface of the guard faces towards
the trimmer head (Fig. 4).
4. Lock the guard in place with the
bolts and the M5 hex wrench (Fig. 5).
56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER
Always wear gloves when mounting or replacing the guard. Be careful
Always remove the battery pack from the product when you are
3
4
5
11
Publicidad
