Descargar Imprimir esta página

FEUERHAND BABY SPECIAL 276 LED Manual De Instrucciones Original página 19

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 148
• Attention! If you do not use the LED lan-
tern for a longer period of time, remove
the batteries. This will protect your LED
Baby Special 276 from battery leakage.
• Warning! Risk of injury! If batteries/re-
chargeable batteries have leaked, protect
your hands with protective gloves, other-
wise they will cause skin burns.
• Warning! Risk of injury! Never take bat-
teries apart, short-circuit them or throw
them into a fire.
• Warning! Do not attempt to charge
non-rechargeable batteries.
• Warning! The connection terminals must
not be short-circuited.
• Warning! Keep the batteries out of the
reach of children. Danger of swallowing!
• Warning! Do not use dissimilar battery
types or a combination of used and new
batteries.
• Warning! You cannot and must not re-
place the LED diode.
OPERATION / LOCATION OF USE / TRANSPORT
• Always observe the applicable national
and international safety, health and work
regulations.
• Ensure safe and damage-free transport,
store the Feuerhand LED Lantern Baby
Special 276 safely and frost-free and not
in places with high humidity, remove the
packaging and wipe off any dust that may
have formed.
• The product may only be used if no defect
was found during the inspection. If a part
is defective, it is essential to replace it
before the next use.
• The immediate environment must be free
of highly flammable or explosive sub-
stances.
• Always work with care and only when in
good condition: fatigue, illness, alcohol
consumption, medication and drug in-
fluence are irresponsible as you can no
longer use the product safely.
• Place the lantern so that no one can trip
over it. Danger of injury!
• Place the lantern on a dry, horizontal
surface, e.g. table.
ca. 15 cm
DE
EN
FR
DA
FI
EL
IT
JA
NL
NO
PL
SV
ES
19

Publicidad

loading

Productos relacionados para FEUERHAND BABY SPECIAL 276 LED

Este manual también es adecuado para:

276-led-zinc