User Maintenance - Frucosol SELF-SERVICE Manual De Usuario

FUNCTIONING OF THE COUNTER:
1.Plug the machine to the electrical supply and press themachine on/off button that is in one side of
the machine.We will have to press also the automatic feeder button for the model F-50AC; it is also in
one side of the machine.
2. Press to ON-OFF counter button.
3. Pressing the ''+'' button we will select the numbre of oranges we want to squeeze. Then we will select
from 1 to 9. If we go further than 9, we will select the continuous mode that will be showed on screen
with the icon CoM. To decrease the number of oranges selected, we will press the ''-'' button.
4. Once we hace selected the quantity we need, we will press the '' glass'' button; then the machine will
start to work.
. To cancel the squeezing process, press again the glass button
. After 20 seconds without squeezing, the machine will stop automatically.
. To know exactly how many oranges we have squeezed, we will press + and - for some seconds at
the same time.
A proper care is essential in order to make the machine's life longer.
Be sure to take a few minutes to clean the juicer regularly.
Before cleaning it, be sure to turn the power switch off and remove the power cord from the outlet.
Don't use thinner, benzene or other volatile cleaning agents for cleaning inside the machine. Use a damp
cloth with a bit of neuter soap and make sure to clarify any rest of soap that could still remain.
To clean the exterior you can use a cloth and a wipers liquid. The wipers liquid cannot be in contact with
the inside or the with the pieces of the squeezed mechanism. Follow faithfully all the indications of the
manufacturer about the installation, paying special attention to the positioning and working section.

9. USER MAINTENANCE

57
EN