WEG CFW700 Serie Manual Del Usuario página 69

Technical Specifications
OUTPUTS ANALOG
(CC700
board)
RELAY
TRANSISTOR
SAFETY PROTECTION
INTEGRAL STANDARD
KEYPAD KEYPAD
(HMI)
ENCLOSURE IP20
NEMA1/IP20
IP21
NEMA1/IP21
IP54
IP55
(1) Available from the serial number 1024003697.
(2) Models 180 A and 211 A with 220 / 230 V and 380...480 V power supply, and models 125 A and 150 A with 500...600 V
power supply require special hardware H1.
64 | CFW700
2 non isolated outputs.
„
Voltage (0 to 10 V) or current (0/4 mA to 20 mA) output.
„
Maximum load: RL ≥ 10 kΩ (voltage) or RL ≤ 500 Ω (current).
„
Resolution: 10 bits.
„
Programmable functions.
„
1 relay (NO/NC).
„
Maximum voltage: 240 Vac / 30 Vdc.
„
Maximum current: 0.75 A.
„
Programmable functions.
„
4 open collector isolated digital outputs (with the same reference as
„
the 24 V power supply).
Maximum current: 80 mA.
„
Maximum voltage: 30 Vdc.
„
Programmable functions.
„
Note: When the load of the digital output is fed by an external power
supply, the output status remains indefinite until the internal 24 V
power supply becomes stable.
Output overcurrent/short-circuit.
„
Under/Overvoltage.
„
Phase loss.
„
Overtemperature of the heatsink/internal air.
„
IGBTs overload.
„
Motor overload.
„
External fault / alarm.
„
CPU or memory fault.
„
Output phase-ground short-circuit.
„
9 operator keys: Start/Stop, Up arrow, Down arrow, Direction of
„
rotation, Jog, Local/Remote, BACK/ESC and ENTER/MENU.
LCD display.
„
View/edition of parameters.
„
Indication accuracy:
„
- current: 5 % of the rated current.
- speed resolution: 1 rpm.
Possibility of remote mounting.
„
USB communication port.
„
Frame sizes A, B and C inverters without the top cover and with
„
Nema1 kit.
Frame size E inverters without Nema1 kit.
„
Frame size D inverters without IP21 kit.
„
Frame size E inverters with Nema1 kit (KN1E-01 or KN1E-02).
„
Frame sizes A, B and C inverters with top cover.
„
Frame sizes A, B and C inverters with top cover and with Nema1 kit.
„
Frame size D inverters with IP21 kit.
„
Rear part of the inverter (external part for flange mounting).
„
Rear of the inverter with degree of protection IP20 (external part for
„
flange mount).
(2)
Frame sizes B, C, D and E.
„
(1)