Active protection system
7 Take the appliance out of the After-Clean & Storage station and place it on
the floor. Put your foot on the AquaSpin nozzle and pull the handle
backwards to unlock the AquaSpin nozzle. The appliance is now ready for
use.
8 To switch on the appliance, press the on/off
on.
Caution: do not leave the appliance unattended when the AquaSpin
nozzle is unlocked or when the appliance is switched on.
9 Use the + and - buttons to toggle between three different settings:
-
Water absorption mode
-
Normal wet mode
-
Intense wet mode
By selecting the normal wet mode
wet cleaning. The intense wet mode
If there are wet spots on the floor after cleaning, you can select water
absorption mode
lifting the appliance over a threshold, carpet or stairs.
If you select water absorption mode
water and increase suction power for 45 seconds to absorb remaining water
on the floor.
10 When you are done using the appliance, switch it off by pressing the on/off
button. The appliance will switch to water absorption mode
seconds to clean up any water remaining in the nozzle.
Note: The appliance can leave a small puddle of water on the floor if you
do not move the appliance while switching it off. You can reduce the size of
the puddle by moving the appliance while switching it off. If needed, you can
remove the last drops with a cloth.
-
This appliance is equipped with an active protection system. This active
protection system has been designed to recognize when a foreign object
other than dirt or liquid is picked up from the floor.
-
When the system is activated, the appliance switches off and the i3 message
appears on the display (see 'Display icons and their meaning'). The active
protection system can also be activated when the microfiber brushes are too
wet, when you move the appliance over a carpet or a rug, or when you move
it over flooring that is not properly affixed.
, you can use the appliance for regular
is for cleaning extra stubborn stains.
to clean them up. We also recommend using it when
, the appliance will stop supplying
English
button. The appliance will turn
for 4
11