Philips AquaTrio Cordless 7000 Serie Manual Del Usuario página 29

Problem
Error code 'E2' appears on
the display.
Error code 'E3' appears on
the display.
Possible cause
The temperature is too low.
The temperature is too high.
Solution
Philips service center or contact the
Consumer Care Center.
Make sure the temperature in the room
where the appliance is used, stored, or
charged is above 5 °C. If the device is used
and stored at the correct temperature and
still shows the error code, please take it to a
Philips service center or contact the
Consumer Care Center.
Make sure the temperature in the room
where the appliance is used, stored, or
charged is below 35 °C. Do not expose the
device to direct sunlight or high
temperatures (near hot stoves, in
microwave ovens, or on induction cookers).
If the device is used and stored at the
correct temperature and still shows the
error code, please take it to a Philips service
center or contact the Consumer Care
Center.
English
29