FOREWORD
We thank you for choosing our product. It is designed for you according to the
highest quality standards. Please read the operation manual carefully before
using and operating the unit. Heed all warnings. If the device is passed on to
another person, this manual must be handed over to the user along with it.
Please keep this manual handy for future reference.
INTENDED USE
• This device is designed to help the driver safely detect people and/
or objects helping to avoid damage or injury. However, you must use it
properly. Use of this system is not a substitute for safe, proper or legal
driving.
• Never reverse/drive while looking at the monitor alone. You should always
check behind and around the vehicle when reversing/driving, in the same
way as you would if the vehicle did not have the rear view camera system.
• Always remember the area displayed by the rear view camera system is
limited. It does not display the entire panorama behind your vehicle.
SAFETY INSTRUCTIONS
Read this user manual carefully before using the product. If you do not
observe the instructions on proper handling in this manual, we shall not be
held liable for any resulting personal injury or damage to property.
1. Please install this product within the voltage range specified. Failure to do
so can cause electronic shock or product malfunction.
2. Electric shocks or product malfunctions may occur if this product is
installed incorrectly.
3. If smoke or a burning smell is detected, disconnect the system immediately.
4. Make sure to firmly affix the product before use.
5. Take special care when cleaning the monitor.
6. Where the power cable may touch a metal case, cover the cable with a
friction tape. A short circuit or disconnected wire may cause a fire.
7. Do not install the monitor where it may obstruct the driver's view or
obstruct an airbag device.
8. Feed as much cable as possible into the vehicle and clamp it securely. This
reduces the possibility of the cable being hooked or snagged.
USER MANUAL
EN
17