Paingone ellune KTR-2302 Manual Del Usuario página 10

Positioning the electrode pads
In the next step we will apply the pads
to the required area. You can apply them
on the abdomen or the lower back,
depending on where you have the
most pain.
Aim to position the pads on either side
of the painful area, at the same height,
and at a distance of 5-10cm apart from
each other.
Applying the electrode pads
1. Ensure that your desired area of application is clean and dry.
2. Remove the remaining plastic liners from the gel pads.
3. Apply the pads as required on the abdomen or lower back.
Connecting the pads to Ellune
1. Now, take the connecting cable and connect this to your Ellune device.
Using Ellune
1. Press the power button to
activate Ellune.
2. Set the intensity to a level you
find comfortable. Use the "+"
button to increase the intensity.
You can tap it to increase by just
one level. Or hold the button
down to change levels rapidly.
If the intensity becomes too
strong, press the "-" button to
reduce intensity.
3. The screen displays your
chosen intensity level. There
are 35 levels in total.
10
+
+ +
+
+