Paingone ellune KTR-2302 Manual Del Usuario página 9

Everything you need to
know about using Ellune
Before using for the first time
We recommend charging your Ellune before using
for the first time. This will give your device the best
possible start and ensure it performs optimally.
1. Connect the charging cable to Ellune
2. Connect the cable to a USB charger
3. We recommend charging for 2 hours this first time.
All future charges take approximately 1 hour.
Device Set-up
1. Take the electrode pads.
2. Attach the first pad to the
connecting cable. The pads
connect via metal press studs.
Press until the connection snaps
firmly into place.
3. Repeat this action with the
second pad.
4. Take a gel pad. Remove a plastic
liner from one side of the pad (be
sure to retain liners for later)
5. Apply the gel pad to the reverse
(the black side) of on
electrode pad.
6. Repeat the above with the
second gel pad, applying it to the
second electrode pad.
connect
1
2
5
Scan the QR
code to watch a
'how-to' video
3
4
6
EN
9