Paingone ellune KTR-2302 Manual Del Usuario página 11

4. Once you are comfortable, you can attach Ellune to your waistband
using the clip on the reverse of the device.
5. Let Ellune do it's work while you get on with the things you love. The
device will run until you press the power button or the battery
is exhausted.
Lock function
To avoid accidentally changing the intensity
or turning the device off during use, press the
'lock' button to activate lock mode. This will
disable all the other buttons. Simply press the
'lock' button once more to exit lock mode.
Connection error
If Ellune detects that there is a connection
error, it will pause therapy and display the connection
error symbol on the display screen.
To resolve a connection error, check that:
- The gel pads are applied firmly to your skin
- The connecting cable is correctly attached to the pads and Ellune device
Once connection is re-established, Ellune will automatically resume therapy
and return to the intensity level that was previously selected.
Over time, the connecting cable and/or electrode pads may deteriorate
from daily wear and tear. These parts can be replaced. Contact your local
distributor or visit www.paingone.com for replacements.
Finishing a session
1. To stop the Ellune therapy, simply press the power button.
2. Carefully remove the pads from your skin.
3. Place a plastic liner back over each gel pad. This will keep them in
optimum condition for their next use.
4. You can store Ellune and its accessories in the carry bag supplied.
EN
11