Publicidad
Idiomas disponibles
Idiomas disponibles
Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
. Apply one drop of oil to each of the outer foils.
. Raise the trimmer and apply a drop of oil.
. Switch the shaver on, and run it for approximately
five seconds.
5. Switch off the shaver, and wipe off any excess oil
from the outer foils with a soft cloth.
•
It is not necessary to oil the blades after cleaning the shaver with
the self‑cleaning recharger. (Lubricant is included in the cleaning
detergent.)
Cleaning with the brush
Clean the inner blades using the short brush
by moving it in direction (A).
Clean the system outer foil, the shaver body
and the trimmer using the long brush.
•
Do not move the short brush in direction (B)
as it will damage the inner blades and affect
their sharpness.
•
Do not use the short brush to clean the outer
foils.
10
All manuals and user guides at all-guides.com
Replacing the system outer foil and the inner blades
2
1. Press the foil frame release buttons and lift
. Press the system outer foil release buttons
. Align the foil frame mark (
3
. After turning the foil frame mark (
1. Press the foil frame release buttons and lift
(A)
. Remove the inner blades one at a time.
. Insert the inner blades one at a time until they
(B)
system outer foil
inner blades
Replacing the system outer foil
the outer foil section upwards.
and pull down the system outer foil.
) and the system
outer foil mark ( ) and securely attach
together.
•
The system outer foil cannot be reversely
attached.
•
Always insert the system outer foil to the foil
frame when attaching to the shaver.
front, securely attach the outer foil section to
the shaver until it clicks.
Replacing the inner blades
the outer foil section upwards.
•
Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
click.
once every year
once every two years
1
2
3
) to the
1
2 3
Publicidad
