Publicidad
Idiomas disponibles
Idiomas disponibles
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
g) Use the power tool, accessories
etc. in accordance with these
operating instructions. Take into
account the working conditions
and the work to be carried out.
Using the power tool for anything
other than its intended use can lead to
dangerous situations.
h) Keep handles and grip surfaces
dry, clean and free from oil and
grease. Slippery handles and grip
surfaces do not permit safe operation
and control over the power tool in un-
expected situations.
5) USE AND TREATMENT OF THE
BATTERY-POWERED TOOL
a) Only recharge batteries using
chargers recommended by the
manufacturer. If a charger that has
been designed for a particular type of
battery is used to charge other batter-
ies, there is a risk of fi re.
b) Only use the battery that is
intended in an electric tool. The
use of other batteries may create a fi re
hazard and lead to injury.
c) When not in use, keep batteries
away from paper clips, coins,
keys, nails, screws or other
small metal objects that could
cause the contacts to be bridged.
A short circuit between battery contacts
can result in burns or a fi re.
d) When misused, fl uid may leak
from the battery. Avoid any
contact with it. On accidental
contact, wash in running water.
If the fl uid comes into contact
with the eyes, also seek medi-
cal assistance. Leaking battery fl uid
can cause skin irritation or burns.
e) Do not use damaged or altered
batteries. Damaged or altered batter-
ies can be unpredictable and lead to
fi re, explosion or risk of injury.
f) Do not expose batteries to fi re
or elevated temperatures. Fire or
temperatures over 130 °C can cause
an explosion.
g) Follow all instructions for charg-
ing, and never charge the bat-
tery or the battery-powered
tool outside the temperature
range stated in the instruction
manual. Incorrect charging or charg-
ing outside the permitted temperature
range may destroy the battery and
increase the risk of fi re.
6) SERVICE
a) Have your power tool serviced
by a qualifi ed repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never repair damaged batter-
ies. All battery repairs should be car-
ried out by the manufacturer or author-
ised customer service centres only.
Instructions for grass shears
a) Do not use the grass shears in
bad weather, especially if the-
re is a danger of a storm.This
reduces the risk of being struck by
lightning.
GB
MT
27
Publicidad
