melitta PASSIONE OT F531-101 Manual De Instrucciones página 67

5 Preparing beverages
There are two options for preparing beverages:
ū Standard dispensing as described below,
ū Selection and preparation of a recipe (see section 5.6 Preparing further
beverage specialities with recipes on page 69).
Information
The default settings for standard dispensing or for a recipe can be perma-
nently changed (see section 6.1 Changing default settings on page 73).
Please note:
ū There should always be sufficient water in the water tank. If the fill level
is too low, the appliance requests you to refill it.
ū There should always also be sufficient coffee beans in the bean con-
tainer. If there are no longer any coffee beans present, the appliance
stops the preparation of a coffee beverage.
ū The appliance does not detect the level of milk.
ū The vessels for the beverages should be sufficiently large (see table
Factory settings on page 90).
5.1 Preparing Espresso and Café Crème
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "Espresso" or "Café Crème" button.
» The grinding process and beverage dispensing start.
» Beverage dispensing ends automatically.
3. Remove the vessel.
» The ready symbol appears on the display.
Preparing beverages
67