Wall Control Panel Awp-06 - Optimus A8000X Serie Manual De Instalación Y Funcionamiento

Speech filter:
Press TALK and Z2 at the same time for more than 3 seconds. TALK and Z2 LEDs will flash. Press
Z2 key, there will be a sequential change, filter ON / filter OFF. (LED ON = 1, LED OFF = 0).
Press TALK key to exit.
Preset function:
Press TALK and Z1 at the same time for more than 3 seconds. Z1 to Z6 LEDs will flash. Select a
key (Z1 Z6) to store group setting. All LEDs will flash. Select the zones to be programmed into
each group.
Press TALK key to confirm and exit.

11.14 Wall control panel AWP-06

The wall panel can control the A-8240X from a remote site. It is possible to select the desired
music source and the destination zones. The unit also allows the control of master volume, and the
insertion of external microphone/line input.
It is necessary to select REMOTE in the front panel of A-8240X to operate the wall panel. The wall
panel will remain in standby mode till its activation button is also pressed. Once activated the LED
will light and the panel will take the control of the A-8240X.
The LED will flash every 200 ms if a higher priority signal is operating.
The LED will flash every second if REMOTE is not set in the A-8240X.
Use CAT 5 cable. Maximum cable length is 600 m.
A8000X Series Version 1.4
Serie 8000
S. FILTER Z1
ON 0
OFF 1
Página 18 de 33