Installation And Operation; Set Ac Line In Voltage; Plug In Ac Cord; Set The Mode Dip Switch - Optimus A8000X Serie Manual De Instalación Y Funcionamiento

11. INSTALLATION AND OPERATION

11.1 Set AC line in voltage

Never set the switch to wrong AC line voltage. It will cause damage to the unit.

11.2 Plug in AC cord

11.3 Set the mode Dip switch

Set the Mode switch to OFF (up) to operate the equipment in
Stand Alone mode.
Set the Mode switch to ON (down) to operate the equipment in
Dual Channel mode.

11.4 Set 20 kHz switch

Set the 20 kHz switch to OFF (up). 20 kHz signal off.

11.5 Set the priority of MIC 1 ~ 6

Set the MIC Priority switches according to the following table:
Note: In MIX mode microphones are mixed with BGM.
PRIORITY
CASCADE
MIC1 > MIC2 > MIC3 > MIC4
> MIC5 > MIC6
FIFO First input first output
LIFO Last input first output
MIX
A8000X Series Version 1.4
Serie 8000
3
OFF
OFF
0N
0N
4
0FF
0N
0FF
ON
Página 13 de 33