EN
•
Make sure that the deadman's handle does not become jammed.
•
Stop immediately if the system makes strange noises or displays aberrant behaviour.
•
Stop immediately if the equipment leaks oil. Oil escaping under pressure can penetrate the skin and
cause serious injury. Go immediately to a hospital with a person who is injected with oil for medical
help. Give a specification of the oil to the medical staff.
•
Always adhere to the safety regulations that apply to other equipment that is used in the operation.
2.7
Safety regulations with respect to maintenance
•
Wear personal means of protection when performing maintenance tasks.
•
Never work in a way that could jeopardize safety.
•
Make sure that the equipment cannot roll away or tip over. The control and drive must be switched
off and safeguarded against unexpected activation.
•
Make sure that moving parts do not move unexpectedly.
•
Used or leaked fluids, and any other products consumed during the activities, must be collected and
disposed of in a environmentally responsible way.
3
Description
3.1
Equipment
The cutter is produced as a hand tool that can be operated by one person. Two hoses connect the tool
to a pump. On the front of the tool there are two blades that make a scissor movement. The high
hydraulic pressure that is used means these tools can apply enormous forces.
3.1.1
Type designation
Example: ICU 40 A 20
/i
Digit Example
Description
1-3
ICU
ICU = Industrial cutting unit
4-5
40
Type indication
6
A
A = Aluminium body
7-8
20
Blade choice
20 = short parrot alike blade
30 = standard blades
3.2
Product identification
Refer to Fig. 2
/i
1
Blade
2
Carrying handle
3
Deadman's handle
4
Return line safety valve
3.3
Weight and dimensions
The dimensions are without the connection hoses. Refer to Fig. 3.
/i
Model
Part number
ICU 40 A 20
170.012.042
26
5
Hydraulic coupler (female)
6
Hydraulic coupler (male)
7
Protection sleeve
8
Blade cutting edge
Length (A)
Weight (kg)
(mm)
19.0
916.000.375_003
Width (B)
(mm)
720
270
Height (C)
(mm)
218
ICU 40