Holmatro ICU 40 A Serie Manual página 33

8 Maintenance
8.1 General
For standard installation instructions, refer to the Service & Support section of the Holmatro website.
Proper preventive maintenance of the equipment preserves the operational safety and extends the life
of the equipment.
WARNING
When performing maintenance activities, always comply with the relevant safety regulations.
Wear the prescribed personal protection equipment.
8.1.1 Dangerous substances
WARNING
Used or leaked fluids, and any other products consumed during the activities, must be
collected and disposed of in an environmentally responsible way.
8.2 Maintenance materials
/i
Application
Steel parts
Hydraulic couplers
Hinge pins
Contact the Holmatro dealer for information on spare parts.
8.2.1 Maintenance accessories for ICU 40...
/i
Description
grease kit
sealing set hydraulic
plunger guide set
lever set
hinge bolt set
hinge pin set
sealing set control
spare blade ICU...20
spare blade ICU...30
torque wrench (40-200 Nm)
ratched head for torque wrench
cap hex size 41 for torque wrench
spray coating Bel-Ray
teflon spray
set of spray to detect tears
grease pump
ICU 40
Type of maintenance material
WD-40 preservative oil
Tectyl ML from Valvoline (long term preservation)
WD-40 preservative oil
Teflon lubricating oil
916.000.375_003
Part number
170.013.021
170.013.039
170.013.060
170.013.053
170.013.061
170.013.062
170.013.050
170.013.063
170.013.064
150.581.671
150.581.672
150.581.691
150.581.093
150.581.095
150.582.547
150.581.081
EN
Amount
As required
As required
As required
As required
33