Publicidad
Remove the problems
Display
Description
LED
Door lock
E30
problem
Water injecting
problem when
washing (water
E10
injecting time
exceeds 7
minutes)
Drain problem
while washing
E21
(drain time
exceeds 3 minutes)
Door is not closed properly.
Please call up service line if there are still troubles.
Tap is not opened or water
flows too slowly.
Inlet valve filter is blocked.
Inlet pipe is twisted.
If water is not supplied
Please call up service line if there are still troubles.
Outlet hose is blocked ortwisted
Drain pump is blocked
Please call up service line if there are still troubles.
Please call up the service line if there is any other problem.
Reason
Restart after the door is closed
Wash and straighten outlet hose.
Wash drain pump filter
24
Solution
Open the tap or wait till
the water supply
becomes normal.
Check inlet valve filter.
Straighten the water pipe
Check the other taps in
the room.
Publicidad
