osann Eno360 Manual Del Usuario página 18

EN
Thank you for choosing our Eno360 infant car seat. If you need help with this product, please con-
tact our customer service.
HOW TO USE
• This product is suitable for children with a height of 40 to 150 cm.
• Installation is rear-facing from 40 to 105 cm body height using the Isofi x connectors and the
Top-Tether belt. The child is strapped in with the 5-point belt of the child car seat.
• Forward-facing installation from 76 to 105 cm body height and a minimum age of 15 months
with the aid of the Isofi x connectors and the Top-Tether belt. The child is strapped in with the
child car seat's 5-point belt.
• Forward-facing installation from 100 to 150 cm body height is carried out with the aid of the
Isofi x connectors. The Top-Tether strap is not needed in this size class. The child is strapped
in with the car's 3-point seat belt. Alternatively, the child car seat in the 100-150 cm size class
can also be fi tted with the 3-point seat belt only. Attaching the seat with the Isofi x connectors
is not absolutely essential but is recommended.
IMPORTANT
DO NOT USE THE CHILD CAR SEAT FACING IN THE DIRECTION OF TRAVEL UNTIL THE CHILD HAS
REACHED THE AGE OF 15 MONTHS.
EXTREME DANGER
We recommend installing the child car seat on the rear seat of the vehicle. DO NOT attach the
child car seat for rear-facing use in the 40 to 105 cm height class to the front seat where there
is an airbag. It may be used on the front seat if the airbag can be deactivated. Please refer to the
vehicle manual for more information on this.
PLEASE NOTE
NOTE (40-105 cm):
This is an i-Size child restraint system. It is approved under Regulation No 129 for use in 'i-Size
compatible' vehicle seats as specifi ed by the vehicle manufacturer in the vehicle owner's manual. In
cases of doubt, please contact the manufacturer of the child restraint system or the dealer.
The child restraint system can be used on all Isofi x seats as long as there is also an attachment
hook for the top tether.
- 18 -