osann Eno360 Manual Del Usuario página 26

EN
Stowing the 5-point seat belt for size class 100-150 cm
• Extend the seat belt system to its maximum length.
• Open the seat cover at the back of the child car seat and thread the shoulder straps and shoulder
pads out of their metal brackets on the back of the child car seat and pass them through the front
of the child car seat (Fig. A).
• Open the belt system and remove the shoulder pads.
• Open the cover at the back area using its snap buttons and fold it away. Also, fold the lower part
of the headrest cover to the side.
• Fold the belt together with the belt buckle tongues so that it can be stored behind the cover in
the recess on the backrest (Fig. B).
• Remove the buckle pad and carefully remove the cover in the seating area so that you can pass
the buckle through the opening in the seat cover.
• Store the buckle in the designated recess in the seating area (Fig. C).
• Place the cover back over the seating area.
• Fold the lower part of the headrest cover back and raise the cover of the back area again, closing
it with its snap buttons.
• Keep the removed pads well for later reuse.
• Store the top tether strap in the storage pocket at the back of the child car seat.
A
B
- 26 -
C