osann Eno360 Manual Del Usuario página 31

1 . Set the age of your child on the RotationControl knob.
2 . Press the two lateral Isofi x connector buttons in order to extend the length of the Isofi x con-
nectors.
3 . Guide the Isofi x connectors onto the Isofi x anchor points on the seat of the vehicle and ensure
that they lock into position.
4 . Push the child car seat in until it rests securely against the backrest of the car seat. Ensure that
both Isofi x indicators are switched to green.
5 . Take the top tether out of the storage bag and extend it to its full length.
6 . Clip the top tether onto the hook provided in your car (e.g. on the back of the car seat or in the
boot. Please consult your car manual for this).
7 . Tighten the top tether until the display on the top tether turns green.
8 . Unfasten the belt buckle on the child car seat and place the belts on the outside of the seat.
9 . Put your child in the child car seat.
10 . Adjust the height of the headrest as described above.
11 . Fasten the belt buckle again until you hear a click.
12 . Pull the front adjustment strap to tighten the belts. Ensure that the straps are not twisted.
13 . When facing in the direction of travel, the child car seat offers fi ve adjustable seat positions.
- 31 -
EN