Publicidad
Idiomas disponibles
Idiomas disponibles
Reverse Door
5. Unscrew bottom hinge. Then remove the adjustable feet from another
side.
6. Unscrew and remove the bottom hinge pin with flat screw drivers, turn the bracket over and
replace the pin.
7. Refit the bracket fitting the bottom hinge pin. Replace the adjustable
foot.
8. Place the door back on. Ensure the door is aligned horizontally and
vertically so that the seals are closed on all sides before finally
tightening the top hinge.
9. Insert the hinge bracket and screw it to the top of the unit.
10. Use a spanner to tighten it if necessary.
Unscrew
12
Screw
Publicidad
