Publicidad
Idiomas disponibles
Idiomas disponibles
3-2 Date and Time Settings
Make sure you set the date and time before your recording to "Protect Your Side of The Story".
1. Press the MENU button to enter the menu screen. Press the Menu button again to go into
System settings, then select "Date Input" to enter date and time settings.
2. Press the Left/Right buttons on the Dash Cam to make changes to date or time, then
press the OK button to confirm.
3-3 Video Recording Mode
3-3-1 Continuous Recording
By default, the system will automatically begin continuous recording a few seconds after
start-up. The Recording icon
The blue light should flash, indicating that recording is in progress. You can manually stop
the recording by pressing the OK button. Pressing the OK button again will restart contin-
uous recording.
The recorded video will be saved under the "DCIM" folder on your Dash Cam's TF memory
card.
Night Mode
When recording at night, you can press the Power button to enable Night mode. The Night
Light LED will then enhance brightness for the recording.
Notes
Note
•
In Recording mode, press the Menu button to open video recording settings. You can
enable or disable voice recording along with video, and set recording time for video
clips: 1 mins / 3 mins / 5 mins/ 10 mins.
•
When the memory card is full, new videos will record over the oldest videos.
will appear on the upper right corner of the display screen.
7
EN
Publicidad
