tacwise Hobby 53 Manual Del Operador página 5

Electric Stapler/Nailer
EN
Congratulations!
On the purchase of your power tool. Your tool will perform to your
satisfaction for a long time if handled in accordance with our Safety
and Operating instructions.
Save this manual for future reference
Technical data
Tool Electric Stapler/Nailer
Model name Hobby 53 & 13EL
Model number 1702
Staple type (Tacwise) 53 & 13 Staples
Staple length 8-14mm
Nail type (Tacwise) 18G Nails
Nail length 10-14mm
130 Staples or
Magazine capacity
80 Nails
Max. firing speed 30 Staples or Nails per minute
Fitted plug
Input voltage 220-240V ~50Hz (UK) / 230V ~50Hz (Euro)
Amps 13 Amperes (UK)
Rated power 70W
Vibration emission level* ah = 7.7 m/s
A-weighted sound
79 dB(A); K:3dB(A)
pressure level
A-weighted sound
90 dB(A); K:3dB(A)
power level
Weight 0.84kg
* The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase exposure level over the total working period.
Declaration of Conformity
This power tool has been designed in compliance with the
Regulations and Standards of the European Directives, German
Product Safety Act, and UK Conformity Assessed Standards.
Quality Department, Tacwise Group Plc – UK
WARNING! Before use carefully read and understand
all instructions.
Failure to do so could result in electric shock,
fire and/or serious personal injury. The term "power tool" in all of
the warnings listed below refers to mains-operated (corded) tools.
For any queries relating to safety matters on this power tool, please
email service@tacwise.com.
Unpacking
• Carefully remove the power tool and accessories from the
outer packaging.
• Inspect the power tool carefully to make sure no breakage or
damage occurred during transit.
• If any parts are damaged or missing, please email
service@tacwise.com for assistance. Do not operate this power
tool until the missing or damaged parts are replaced. Failure to do
so could result in a personal injury.
• Whilst every effort has been made to ensure accuracy of
information contained within this manual, the Tacwise policy is one
of continuous improvement to our products and as such we reserve
the right to change the product specification without prior notice.
Electric stapler-nailer_manual_PRINT.indd 5 Electric stapler-nailer_manual_PRINT.indd 5
FASTENING TOOLS FOR THE PROFESSIONAL
140EL Pro
1703
140 Staples
8-14mm
18G Nails
10-14mm
80 Staples or
80 Nails
UK/Euro
16 Amperes (Euro)
2 K = 1.5 m/s 2
General Safety Instructions
Important.
Tacwise recommends that this power tool should not
be modified or used for any application other than that for which
it was designed. Any such alteration or modification is misuse and
could result in a hazardous condition leading to a personal injury. If
you are unsure of its relative applications do not hesitate to contact
us and we will advise you.
Work Area
• Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
• Keep children and pets away. All visitors should be kept a safe
distance from work area.
• Avoid dangerous environments. Do not use power tool in damp
or wet locations, or expose them to rain. Provide adequate space
surrounding the work area. Do not use in environments with a
potentially explosive atmosphere, such as in the presence of
flammable liquids, gases or dust; power tools will create sparks
which may ignite the dust or fumes.
• Secure work. Use clamps or a vice to hold work. This frees both
hands to operate the power tool.
Personal Safety
• Stay alert. Always watch what you are doing and use common
sense. Do not operate a power tool when you are tired or under
the influence of medication, alcohol or drugs.
• Wear proper clothing. Do not wear loose clothing or
jewellery that can catch in moving parts. Non-slip footwear is
recommended. Contain long hair and roll long sleeves up above
the elbow.
• Avoid accidental starting. Make sure the switch is in the locked
or off position before plugging the machine into the power supply.
• Do not overreach or use on unstable surfaces. Keep proper
footing and balance at all times.
• Use safety equipment. Dust mask, non-skid safety shoes,
hard hat, and hearing protection must be used for appropriate
conditions. Wear CE or UKCA approved safety goggles at all times.
Normal spectacles only have impact resistant lenses; they are NOT
safety glasses.
Electrical Safety
• Disconnect power from the tool. When not in use, before
servicing, when changing accessories such as staples/nails etc.
or storing the power tool. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
• Do not expose power tool to rain or wet conditions.
• Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce
risk of electric shock.
• Protect yourself from electric shock. When working with power
tools, avoid contact with any earthed or grounded surfaces such
as pipes, radiators, hobs and refrigerators.
• Do not abuse the cord. Never carry the power tool by the power
cable or pull it with force from the socket. Keep the power cable
away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords may create a fire or increase the risk of
electric shock.
• Working outdoors. Only use an extension lead suitable for
outdoor use. Be sure your extension lead is properly wired, and in
good electrical condition.
5
01/03/2023 10:28 01/03/2023 10:28