tacwise Hobby 53 Manual Del Operador página 8

Maintenance
Your power tool has been designed to operate over a long period
of time with a minimum of maintenance. Continuous satisfactory
operating depends upon proper tool care and regular cleaning.
If the machine should fail despite the care taken in manufacturing
and testing procedures, repair should be carried out by our
engineers or appointed service agent. In all correspondence and
spare parts order, please always include the serial number given on
this machine.
Cleaning
• Unplug the tool before cleaning the housing with a soft cloth.
• Keep the ventilation slots clear and regularly clean.
• Clean the magazine (6). Remove any debris that may accumulate
in the magazine during operation.
Lubrication
This tool requires no lubrication. Do not lubricate the tool, as it will
damage the internal parts.
Product Advice and Technical Support
What to do if you have a problem with your Tacwise power tool?
Email service@tacwise.com.
Unwanted Tools
Recycle unwanted materials instead of disposing them as waste. All
tools and packaging should be sorted, taken to the local recycling
centre and disposed of in an environmentally safe way. Alternatively,
please email service@tacwise.com for details on how to dispose of
your power tool free of charge in an environmentally friendly manner.
Guarantee
All Tacwise power tools are carefully checked, tested and are subject
to the stringent controls of Quality Assurance. Tacwise therefore
offers the following guarantee for Tacwise power tools. Your warranty
claim based on your sales contract with the retailer, including your
statutory rights, shall not be affected by this guarantee.
One-Month Guarantee
If you are not completely satisfied with the performance of your
Tacwise power tool or it is faulty or damaged on purchase then
we will exchange the product or issue a full refund within 28 days
of purchase. Proof of purchase must be produced with an original
receipt and the tool must be returned complete as purchased to the
point of purchase. This does not affect your statutory rights.
One-Year Free Service
If your Tacwise power tool requires maintenance or servicing in the
12 months following purchase, it will be undertaken free of charge
by a Tacwise Service Engineer. Proof of purchase must be produced
with an original receipt. This includes labour and spare parts for
the tool. However in some cases the most economical option will
likely be a replacement service exchange unit supplied by Tacwise.
Accessories such as batteries, fasteners, etc are excluded.
8 8
Electric stapler-nailer_manual_PRINT.indd 8 Electric stapler-nailer_manual_PRINT.indd 8
One-Year Standard Warranty
Should your Tacwise power tool become defective due to faulty
materials or workmanship within 12 months from the date of
purchase, we guarantee to replace all defective parts free of charge
or at our discretion, replace the tool free of charge. This warranty
does not cover:
• Tools that have received unauthorised changes or additions.
• Defects caused by using accessories, components or spare parts
other than approved/genuine Tacwise accessories or parts.
• Component parts that are subject to natural wear and tear caused
by use in accordance with our operating instructions.
• Defects to the tool caused by improper use, abnormal
environmental conditions or inappropriate operating conditions,
non-compliance with our operating instructions or insufficient
servicing or maintenance.
• Proof of purchase must be produced with an original receipt.
For details of your nearest Tacwise Service Engineer, please email
service@tacwise.com, or to register your warranty visit
www.tacwise.com/warranty-registration/
01/03/2023 10:28 01/03/2023 10:28