Yakima LANDING PAD 22 Instrucciones De Montaje página 2

First look up your vehicle online at fitlookup.yakima.com. You will find hardware, base pad, and Landing
Pad orientations specific to your vehicle listed in the measurements section or fit notes section. These
will be the parts used for installation. Use this worksheet to check off which are required for your vehicle.
flat pad stepped pad
M8 X 35mm M6 X 28mm M6 X 33mm M6 X 40mm
hardware hardware hardware hardware
Consult your vehicle's owner's manual to
1 2
Thoroughly clean OPEN THE COVER-PLATES.
determine how your cover plates are opened or
your vehicle's roof.
removed. This will vary from vehicle to vehicle.
4X
INSTRUCTION #1035907D-2/12