must not be twisted.
7.
The straps securing the restraint to the vehicle must be tensioned.
8.
Make sure the lap belts run low to adequately secure the pelvis.
9.
If the product has been exposed to strong elements (such as impact), it should
be replaced.
10. Do not make any changes to the seat or add any new components without the
approval of the approval authority. To ensure maximum safety for your child, the
equipment should be fixed and used as recommended in the instructions.
11. The plastic parts of this seat can heat up in the sun and cause burns on the
child's skin.
12. Protect your child and the seat from the sun (for example, by covering the seat
with a light-colored item of clothing). If the seat is not covered, try not to expose
it to the sun. Otherwise the seat may be too hot for your child's skin.
13. Never leave a child alone in a child seat in a vehicle.
14. Luggage and other similar items should be secured so that they do not cause any
injury in a collision situation.
15. Do not use the seat without its fabric cover.
16. The cover cannot be replaced with an item from another set. It is an integral part
of the set and affects the operation of the restraint.
17. Always keep this instruction manual with you.
18. Refer to the vehicle manufacturer's manual.
PARTS DESCRIPTION (FIG. A)
1.
Seat cover
2.
Reduction insert
3.
5-point seat belts
4.
Seat belt tension adjustment strap
5.
Seat tilt adjustment lever
6.
Seat rotation button
7.
Headrest adjustment lever
8.
Headrest
9.
Shoulder strap protection pads
10. Seat belt adjustment button
11. Top Tether strap
12. Anti-rotation frame
‑ 11 ‑
EN