Lionelo Bastiaan RWF i-Size Manual De Usuario página 12

13. ISOFIX arms
14. Side protection system
15. Top Tether strap length adjuster
16. ISOFIX release button
17. ISOFIX sliding lever
18. Storage compartment for the instruction manual
19. Inner belt retaining magnets
INSTALLATION IN THE CAR
Seat installation
Installation via ISOFIX
and Top Tether strap.
Child secured with
5-point harness
Adjust the seat to
one of the 4 available
positions (see: Seat tilt
adjustment).
- Installation via ISOFIX
system and car belts
Or
- Installation via car
belts only
Adjust the seat to
one of the 4 available
positions (see: Seat tilt
adjustment).
REARWARD FACING (40 – 105 CM)
1.
Place the seat on the sofa of the car in the space provided for installation.
2.
Press the seat rotation button (fig. 1) and then move the seat to the rearward-
facing position (fig. 2). The correct setting will be signaled by a click.
3.
Tilt the ISOFIX sliding lever and extend the ISOFIX arms (Figure 6). Anchor the
ISOFIX arms to the hooks located in the car's bench seat (fig. 3). The arms will
interlock and you will hear a characteristic click (fig. 4). Use the plastic guides
EN
Seat Seat position
orientation
Rearward
facing
A
B
Forward
facing
‑ 12 ‑
Child's
measurements
From 40 to
105 cm
D
C
From 100 to
150 cm