Publicidad
Idiomas disponibles
Idiomas disponibles
Fig. 4
EN
› Snap the bracket into the fixture and secure it with the metal
buckle per Figure 4.
Attention. Make sure you select the correct bracket
and orient it correctly when you snap it into the mirror
fixture. Make sure that the buckle is oriented and
fitted correctly. The short bracket B is designed for
vehicles with a multifunction camera (MFC). The long
bracket C is designed for vehicles without a multifunc-
tion camera (MFC).
Fig. 5, 6
Mirror Setup
› Peel off the cover foils from the mirror bracket.
› Grasp carefully the mirror and put it at the marked place on the
windshield / vehicle MFC cover, so that the mirror axis is concent-
ric with the inside mirror bracket axis.
› Press the bracket webs carefully and firmly over the entire glued
surface.
Attention. After peeling off the mirror and re-gluing it,
its sufficient adhesion is no longer guaranteed.
Therefore, make sure that it is positioned correctly
before gluing itself.
Attention. After approx. 10 minutes, press the bracket
webs again. Park your vehicle for at least 6 hours in a
room with the temperature of 18-30°C. Do not load or
handle the mirror in any way during this time.
8
Mirror Usage Warning
The mirror allows the driver and front passenger to have a view
of the rear seat area (e.g., when travelling with children in their
children's vehicle seats). Clean the mirror surface only with a cloth
designed for this purpose (e.g., cleaning cloth for glasses). Under
no circumstances use any abrasive sponge or abrasive cleaning
agents.
Fig. 7
Mirror Tilt Adjustment
› Hold the mirror by its protrusion on the underside of the mirror, so
that you do not touch the mirror glass.
› Tilt the mirror in the arrow direction to the required position.
Caution. The mirror cannot be tilted along its vertical
axis, it only allows its inclination to be adjusted.
In case of any inaccurate gluing of the child view
mirror, or specific adjustment of the inside mirror
according to the driver's habits, they may collide with
each other in the certain positions of the mirrors. In
this case, never adjust the inside mirror forcefully
to prevent its damage (scratches) or the child view
mirror damage (breakage). Flip the child view mirror
to another position, adjust the inside mirror to your
liking and only then adjust the position of the child
view mirror. If the child view mirror still collides with
your vehicle's rear-view mirror, then this pressure may
cause it to peel off or get damaged.
Caution. When driving, pay attention to driving first!
As a driver, you are fully responsible for driving your
vehicle. Only use the child view mirror, so that you
maintain your full control of your vehicle in any traffic
situation.
Publicidad
